Evaluation of ultimate bearing capacity of Y-shaped vibro-pile

作者：王新泉 陈永辉 林飞 卢孝益 张霆circularpilemindlinstresssolutionultimatebearingcapacityoftipstaticloadingtest

摘要：Based on Mindlin stress solution, a numerical computational method was proposed to calculate the stresses in the ground induced by side friction and the resistance of Y-shaped vibro-pile. The improved Terzaghi’s and ЪерезанцевВГ’s methods for ultimate bearing capacity evaluation were proposed by considering the stress strength induced by friction resistance at pile head level of Y-pile. A new method to calculate the ultimate bearing capacity of Y-pile was also proposed based on the assumptions of soil failure mode at the tip of Y-pile and the use of Mohr-Coulomb soil yield criterion and Vesic compressive correction coefficient with the induced stresses in the ground. Based on the comparisons with the field static load test results, it is found that the improved Terzaghi’s method gives higher ultimate capacity, while the other two methods shows good agreement with the field results.

注：因版权方要求，不能公开全文，如需全文，请咨询杂志社