作者：Junjie; Jia; Cuiru; Sunvascularstressanalysisvivointravascularopticalcoherencetomographyimagesegmentation
摘要：Identification of carotid artery atherosclerosis is crucial for the diagnosis of the cerebral apoplexy and other vascular diseases.Intravascular optical tomography(IVOCT)has been employed to clinical coronary imaging for several years.Vessel morphological information on IVOCT images together with blood flow information on Doppler OCT(DOCT)images could provide a more accurate internal environment of arteries.Images integrated with fluid-structure interaction(FSI)could obtain the accurate mechanical responses and the quantitative material characters.A porcine carotid artery was imaged with an intravascular system(C7-XR,St.Jude Medical Inc.St.Paul,Minnesota,USA)in vivo,during which 120 images of one section and 600 images of a 5 mm/s pull back were captured within 6 s.Those images were then overlapped with Doppler phase changes to imply the changes in flow profiles.Segmentation and quantification of vessel structure was done in the software(MATLAB 2014b),including specifically the segmentation of lumen,imaging catheter,vessel wall and the guide wire.Appropriate interpolation functions are selected in the coordinate transformation algorithm to have smooth boundaries from images.A set of flow algorithms include image segmentation,three-dimensional/two-dimensional model reconstruction,inversion of material parameters,fitting of experimental velocity data and theoretical derivation based on simulation results is proposed.All steps are programmed to provide a theoretical basis for the future simplified process control.3D-reconstruction FSI model was built in SOLIDWORKS by lofting operation based on the segmentation results.Commercial finite element software(COMSOL 5.3,Sweden)numerically analyzed the entity model to obtain vessel stress/strain and flow shear stress data.Boundary conditions are from the OCT detection.Material of the artery was set to be the modified Mooney-Rivlin constitutive model and the parameters used were adjusted in an algorithm to match an ex vivo experiment.Wall shear stresses(WSS)and vessel deform
注：因版权方要求，不能公开全文，如需全文，请咨询杂志社
