作者：GeorgeF.VanderVoort; EienaP.Manilova工具钢显微结构硬质合金腐蚀剂铁氧体图像分析马氏体残余奥氏体
摘要：Examination of selectively etched tool steel microstructures by light microscopy provides more information than standard etchants, such as nital, picral or Vilella's reagent. Further, the images are more suitable for quantitative measurements, especially by image analysis. Specimens must be properly prepared, damage free, if selective etchants are to be applied successfully. A number of etchants have been claimed to selectively etch certain carbides in tool steels. The response of these etchants has been evaluated using a variety of well-characterized tool steel compositions. While many are selective, they are often selective to more than one type of carbide. Furthermore, their use in image analysis must be evaluated carefully as measurements showed that the amount and size of the carbides are often greater after selective etching as many of these reagents outline and color or attack the carbides. Selective etching of the matrix, leaving the carbides unaffected works well, but no one etchant will cover the broad spectrum of tool steel compositions. No etchant has been found that will color retained austenite in tool steels and image analysis of retained austenite in tool steels are always much lower than by x-ray diffraction unless retained austenite is the dominant phase present in grossly over-austenitized steels.
注：因版权方要求，不能公开全文，如需全文，请咨询杂志社
