作者：K.Palaniradja; N.Alagumurthi; V.Sounda...气体渗碳最优化碳势存放时间消火时间炉温
摘要：Steel is the most important metallic material used in industry. This is because of the versatility of its engineering properties under different conditions. In one condition it can be very mild, soft and suitable for any forming operation. In another condition the same steel can be very hard and strong. This versatility is made possible by the different heat treatments that the steel can be subject to. One such treatment is Gas carburizing. This is the most widely used process for surface hardening of low carbon steels. In this method the surface composition of the steel changes by diffusion of carbon and or nitrogen and result in hard outer surface with good wear resistance properties. A striking feature of Gas Carburizing process is that in this process the original toughness and ductility remains unaffected even after heat treatment. 3% nickel chromium case hardened low carbon steels are widely used for critical automotive and machine applications such as rack and pinion, gears, camshaft, valve rocker shafts and axles which requires high fatigue resistance. Fatigue behaviour of case carburized parts depends to a great extent on the correct combination of Hardness Penetration Depth (HPD) and the magnitude of hardness at the surface and beneath the surface with low size and shape distortion. In order to reduce the manufacturing costs in terms of material consumption and elimination of the number of processing steps, the effect of Gas carburizing parameters on the fatigue behaviour should already be considered in the parameter design stage. Therefore it is of importance to optimize the gas carburizing process variables to attain quality products with respect to hardness and case depth. In the present paper, the evaluation of process capability was carried out through a Limit Design Concept called orthogonal array design of experiment. To optimize the process variables the influence of several parameters (Holding time,Carbon potential, Furnace temperature and Quench time) of the gas carburizing process on the micr
注：因版权方要求，不能公开全文，如需全文，请咨询杂志社
